Barrettine Armourflex Hard Wax Oil - Clear

Brand: Barrettine

Drying Time: Touch Dry 6-8 Hours, Recoat After 16 Hours

Coverage (m²/litre): 24

Before using, test a small inconspicuous area with all products to be applied to ensure a satisfactory final finish and compatibility.
For freshly laid wood, allow to acclimatise in the room for several days before treating. Moisture content should bebelow 15%.
• Previous coatings must be fully sanded back before application.• Resinous deposits should be removed with a scraper and the surface degreased, with methylated spirits• Repair cracks or open joints with a suitable wood filler• For the best finish, sand first with a coarse (60-80) grit sandpaper moving to a finer (150-180) grit sandpaper to achievea smooth but not overly polished surface on the wood.• Remove any sanding dust thoroughly before application.• If required, apply wood dye• IMPORTANT! Test the colour and compatibility with any wood fillers or dyes on a scrap piece of wood before use.
Not suitable for use over barrier coatings, such as paints, varnishes, or lacquer. These must be removed completely either by sanding, heat gun or paint stripping. If choosing to use paint stripper, either Barrettine Paint Panther or Peelaway may be suitable.

Ensure good ventilation is maintained during application and throughout the drying process:

Ready to use, do not thin.
Stir thoroughly before use.
Apply in thin coats using either a short pile roller, good quality brush or lint free cloth. Over-application can reduce the finish quality and prolong drying time.
On previously treated timber 1 coat is normally sufficient, maximum of 2 coats may be required if applying to fresh or previously untreated timber.
Drying time approximately 6-8 hours under average climatic conditions (23°C, 50% humidity). Preferably allow to dry overnight. Variations in ambient conditions and substrate can affect drying times.
On floors, suitable for light foot traffic approximately 16 hours after final coat.
Avoid covering with rugs/carpets for approximately 10-14 days to allow curing process to fully complete.

Marks and scratches can be touched up without the requirement for sanding. Ensure areas to be repaired are clean and dry. To renovate large areas lightly sand with 120-150 grit sandpaper, remove dust and then apply a single, thin coat.
Never steam clean or saturate floor with water to clean, this may reduce the service life and cause damage to the wood below.

We have a range of delivery options to ensure you receive your DCO order when you need it. Our super quick standard delivery option delivers within two working days but can often arrive sooner! We use DPD to ship items from our warehouse so you will be kept up to date with delivery time scales and you can also leave safe place requests if you won't be available for the delivery.

If you have any queries regarding delivery please contact our helpful team.  

Delivery Options & Charges for Mainland UK

Delivery Options & Charges for More Remote Areas
Delivery to these remote postcodes may take a little longer and we’re unable to offer our express delivery services to these areas. Our team will prioritise your order to ensure it is delivered to you as soon as possible.

Brand specific delivery options

Orders for products from these manufacturers may be shipped separately and delivery times vary. Please see below for more information.

If any part of your order is temporarily out of stock and dispatch is anticipated to be delayed at all, we will contact you by e-mail to notify you of the new anticipated delivery date. If possible we will split your order so you receive goods in stock in a timely manner. Larger orders may be separated into multiple consignments by DPD but these will all be delivered by your estimated delivery date.